



What Is a Drum Heating Blanket?
A drum heating blanket (also called a drum heater jacket, barrel heater or industrial heating blanket) is a flexible, wrap-around electric heater that fastens directly to the outside wall of a 55-gallon (200-litre) drum, an IBC tote, a gas cylinder or a piece of stationary equipment. Inside a heat-resistant outer jacket, evenly spaced heating elements and a reflective insulation layer transfer gentle, uniform heat through the container wall to the material inside — without open flame, hot plates or steam lines.
Every SunAura industrial heating blanket is supplied with its own adjustable thermostat, quick-fit fastening straps and a market-specific plug. It is a reusable, tool-free heating solution: wrap it, set the target temperature, and the controller maintains it. The same blanket can be moved from one drum to the next and reinstalled hundreds of times.
Why Heat a Drum at All?
A wide range of industrial materials are easy to pump, pour, mix or spray only inside a narrow temperature window. In a cold warehouse, an unheated drum, grease, syrup, resin, honey, crude oil or biodiesel can turn viscous, semi-solid or crystallise around the pump inlet. A drum heating blanket keeps the contents at a workable temperature so the material flows, drains completely and does not waste product left clinging to a cold container wall. It also protects water-based liquids, pipes and pumps from freezing in winter storage and outdoor yards.
Key Specifications
The exact rating is configured to order; the table below lists the standard range for this product family. Confirm the final specification on your order confirmation.
| Parameter | Specification / typical range |
|---|---|
| Container fit | 55 gal / 200 L standard drums, IBC totes, gas cylinders, equipment, custom sizes |
| Rated voltage | 110 / 120 / 220 / 230 / 240 / 380 V (120 V US and 230 V EU export versions) |
| Rated power | 500 W – 5000 W; common 200 L full-wrap ratings 1300 W / 2000 W / 3000 W |
| Temperature control | Standalone adjustable thermostat, digital or dial; some models self-limiting (PTC) |
| Standard range | 0–145 °F (approx. -18–63 °C) standard models |
| High-temperature models | Maintenance up to 120 °C; maximum exposure approx. 180 °C |
| Operating current | Typically up to 16 A (220 V / 3000 W) |
| Ingress protection | IP44 — splash-proof for outdoor and wet areas |
| Insulation resistance | 500 kΩ or greater |
| Insulation layer | Approx. 15 mm thermal insulation with aluminium reflective barrier |
| Safety features | Overheat protection, earth grounding, waterproof connector, warning markings |
| Warranty | 1 year (typical) |
Standard Sizes and Container Fit
| Application | Approx. unfolded size |
|---|---|
| 200 L / 55 gal drum, full wrap | 1900 × 880 mm |
| 200 L / 55 gal drum, half wrap | 1900 × 500 mm |
| IBC tote (1000 L), full wrap | 4400 × 1100 mm |
| 5 kg gas cylinder | 780 × 200 mm |
| 15 kg gas cylinder | 980 × 350 mm |
| 45–50 kg gas cylinder | 1320 × 500 mm |
| Flat industrial heating blanket | 125 / 250 / 880 × 1740 mm, custom on request |


How It Works
Nickel-chromium (Ni-Cr) heating wire is laid in a uniform serpentine pattern across the blanket so heat is distributed evenly rather than concentrated in one spot. An aluminium reflective layer behind the element redirects heat inward toward the container, while the roughly 15 mm insulation layer limits losses to the surrounding air. The thermostat reads the operating temperature and cycles power to hold the set point; self-limiting PTC versions automatically reduce output as they warm, so they can safely overlap without overheating.
Key Features and Benefits
- Uniform, gentle heat across the whole container wall — no hot spots that can scorch sensitive materials.
- Fast, tool-free installation with multiple quick-release straps and hook-and-loop fasteners; reusable from drum to drum.
- Adjustable temperature with a clear digital or dial controller and low-temperature to high-temperature options.
- IP44 splash-proof build for outdoor yards, wash-down areas and cold, humid environments.
- Multi-layer insulation with an aluminium reflective barrier reduces energy use and warm-up time.
- Wide voltage and plug options for US, EU, UK and other markets, including custom OEM ratings.
- Safer than open flame or steam — no burner, no fuel line, no pressurised steam.
Materials and Build Quality
The outer jacket is a silicone-rubber-coated fibreglass cloth or a high-temperature waterproof Oxford fabric chosen for fire resistance, water and oil resistance and long service life. Inside, the nickel-chromium element is backed by an aluminium foil reflective layer and a needle-punched thermal insulation layer. Nylon or metal quick-release straps and a sealed controller connector complete the assembly. Each batch is electrically tested for insulation resistance and continuity before packing.

Typical Applications
- Low-temperature heating and viscosity control of 55-gallon oil, chemical, resin, syrup, honey, grease and biodiesel drums.
- Fermentation temperature control for wine, beer and juice vessels (food-grade versions on request).
- Winter freeze protection and temperature maintenance for IBC totes and storage tanks.
- Heat tracing and frost protection for industrial equipment, valves, pumps and pipe sections.
- Insulation of gas cylinders and winter work on construction, cold-store and outdoor equipment.
- Temporary maintenance and emergency repair heating.
Reference Price Guide and Sources
SunAura sells factory-direct at wholesale, so the price you pay depends on the model, voltage, power, quantity and destination. The figures below are publicly listed reference prices from third-party marketplaces and retailers, compiled for comparison; they are not SunAura quotes. Prices and exchange rates change over time, so confirm the current price on the source page before purchasing.
| Type / tier | Public reference price | Source |
|---|---|---|
| Silicone rubber drum heater band, 55 gal, FOB (factory) | US$20-65 / piece | Made-in-China (Kayson) |
| 200 L / 55 gal, 220 V 2000 W silicone band, factory | ~ US$31 / piece | Accio |
| Food-grade 200 L barrel heater (honey/chocolate) | US$37-42 / piece | Alibaba |
| Oxford-fabric 800 W heater jacket, 120/230 V | US$60-80 / piece | Alibaba |
| Water-resistant insulated full-wrap 200 L blanket | US$142-152 / piece | Alibaba |
| 55 gal insulated quilt (non-heated), US retail | US$133.25 | The Cary Company |
| BriskHeat heavy-duty drum heater band, 120 V 1200 W, US retail | US$231.70 | The Cary Company |
| Silicone 200 L / 55 gal jacket, 220 V (CNY) | ¥387.94-454.25 | Alibaba (CN) |
| Full-wrap industrial drum heater, 20-200 L (CNY) | ¥1,458.89-1,710.88 | Alibaba (CN) |
As a general rule, simple silicone heater bands sit at the low end of the market, insulated full-wrap jackets with digital thermostats in the middle, and branded US retail units at the high end. Contact SunAura for a factory-direct quotation matched to your specification and quantity.
Safety and Compliance
Standard build includes overheat protection, protective earth grounding, a waterproof connector and clear warning markings. CE, RoHS, FCC and ETL marks are available depending on the model and destination market; specify your market when requesting a quote so the correct certification and plug are supplied. Food-contact applications require a designated food-grade build and should be stated up front.
Why Choose SunAura as Your Manufacturer
SunAura Thermal has manufactured electric heating products in Qingdao since 2008 and exports directly, so you negotiate with the factory rather than a chain of intermediaries. We support OEM and ODM builds, private label, custom dimensions and voltage ratings, low minimum order quantities and volume pricing for distributors, contractors and e-commerce sellers. Request a quotation with your container size, target temperature, voltage and delivery country, and our export team replies within 24 hours.
Frequently Asked Questions
What size do I need for a standard 55-gallon drum?
The full-wrap jacket for a 200 L / 55 gal drum is approximately 1900 × 880 mm. A half-wrap version at 1900 × 500 mm is available where only partial heating is needed.
Can I use it on a plastic drum?
Yes, both metal and plastic containers can be heated within the rated temperature range. The thermostat prevents the surface from exceeding the set point.
What voltage and plug can I order?
From 110 V to 380 V, with US, EU, UK and other plug standards. Common export builds are 120 V for North America and 230 V for Europe.
Is it waterproof enough for outdoor use?
The blanket is rated IP44, meaning it is protected against splashing water, so it is suitable for outdoor yards and damp locations, though it should not be submerged.
What is the MOQ and lead time?
Minimum order quantities are flexible and stock lines typically ship within 7–25 days. Custom OEM specifications may require a slightly longer lead time.
Do you offer OEM and private label?
Yes. We can build to your logo, packaging, dimensions and electrical parameters while using proven, batch-tested hardware.

Get a Factory Quote for Your Drum Heating Blanket
Send us your container size, target temperature, voltage and delivery country. Our engineers will confirm the specification and wholesale price within 24 hours.
