Get a Quote

Carpet Over Underfloor Heating: Tog and Underlay Guide

Brown area rug in a furnished room

A carpet is a layer of insulation sitting directly on your heater

Most buyers planning underfloor heating assume the floor covering is a finishing decision made at the end. With carpet, it is a heating decision made at the beginning. The same soft pile that makes a bedroom feel warm underfoot is, physically, a layer of insulation sitting between the heating element and the room, and every tog of resistance changes how the system behaves. Specify the wrong combination and the floor either struggles to heat the room at all, or the thermostat keeps pushing heat into a covered element that cannot release it. This guide explains how tog works, what the practical limits are, how to choose underlay and carpet, and what to write on the order so the finished room actually heats.

The good news is that carpet and underfloor heating work together perfectly well when the numbers are respected. The industry guidance is well established, the products are widely available, and the comfort of a warm carpet in a bedroom is one of the nicest experiences a heated floor offers. The failures we see are almost never equipment failures — they are specification failures, where a cheap, dense underlay or a thick felt-backed carpet was fitted without anyone checking the combined tog.

Daniel Foster, Buying Adviser, SunAura Thermal

What tog actually measures

Tog is a measure of thermal resistance: how well a material resists the flow of heat. A higher tog means better insulation, which is exactly what you want in a duvet trapping body heat, and exactly what you do not want on top of a heater trying to push warmth into the room. The scale is simple to interpret — a lightweight summer duvet might be 4.5 tog, a winter one 13.5 — and the same unit is used for carpets and underlays so the figures can be added together.

That addition is the key calculation. The heat from the floor has to pass through both the underlay and the carpet, so the resistance the system actually sees is the combined tog of the two layers. A carpet rated at 1.8 tog on a standard 1.2 tog underlay is a 3.0 tog assembly, even though neither label looks dramatic on its own. This is why asking only about the carpet’s rating is the most common mistake: the underlay frequently contributes as much resistance as the carpet itself.

The established guidance across the UK and Irish flooring industry, repeated by the Carpet Foundation and heating manufacturers, is a combined carpet-plus-underlay rating of no more than 2.5 tog for use over underfloor heating. Some manufacturers publish slightly different ceilings, and the exact figure should always be checked against the heating system’s own instructions, but 2.5 is the number to carry into a showroom as the starting point. Below that, heat moves through the floor freely; above it, the system starts working against the covering.

Brown area rug in a furnished room
Carpet is insulation on top of the heater; the combined tog decides whether the room heats.

Why the limit matters: what happens on the wrong side of it

Understanding the physics explains why the number is enforced rather than advisory. The heating element warms the floor, and the heat then has to conduct through the covering to warm the air. A high-resistance covering acts like a blanket over the element: the heat cannot escape at the rate it is being produced, so the temperature under the carpet climbs while the room stays cool.

Three practical problems follow. The room simply underheats: the thermostat measuring the air never reaches its setpoint, so the system runs longer and uses more energy while delivering less comfort. The floor probe — the sensor embedded in the slab that protects the floor from overheating — can shut the system down repeatedly, because the trapped heat pushes the floor temperature past its safety limit. And over long periods, an element repeatedly held under a hot blanket ages faster than one running at its designed temperature. None of this is dramatic on day one; it shows up as disappointing performance and unnecessary running cost through the first winter.

There is also a comfort wrinkle. A carpet feels warm to the touch regardless, because it insulates your foot from the slab, which can mask the fact that the room itself is not heating. Buyers standing on a cosy carpet may not realise for weeks that the air temperature is lagging every other room in the house. The combined-tog check is what prevents that slow discovery.

Layer Typical tog Notes over heating
Low-tog underlay 0.75–1.0 Purpose-made; the standard choice
Standard foam / felt underlay 1.2–1.8 Often pushes the combined total over 2.5
Heathered carpet (hessian back) 1.2–1.8 Good; breatheable construction
Felt-backed or dense twist 1.8–2.5+ Check the label; many are too dense
Combined target ceiling 2.5 Carpet + underlay together

Choosing the underlay: the decision that does most of the work

If the carpet is the visible decision, the underlay is the engineering one, and it is where buyers should start rather than finish. A purpose-made low-tog underlay is rated around 0.75–1.0 tog, often labelled explicitly as suitable for underfloor heating, and it leaves the full remaining headroom for the carpet. Fitting one is the single most reliable way to bring a combination inside the 2.5 limit.

Resist the temptation to reuse a heavy “premium” underlay left over from another room or offered as a free upgrade. Dense felt and thick rubber underlays can run 1.5 tog and upward, and they are built to insulate — magnificent over an unheated floor, counterproductive over a heated one. The underlay also needs to be dimensionally stable and compatible with the floor build-up; a heating-rated product will state both on the packaging, and a retailer who understands the system will expect the question.

One more underlay point concerns wet rooms and ground floors. A damp-proof membrane detail may be required under the assembly, but a membrane is not the same as a thick insulating underlay, and the two should not be conflated. The membrane blocks moisture while adding negligible thermal resistance; the underlay is the layer the tog calculation applies to.

Choosing the carpet: construction and backing matter more than pile depth

Buyers often assume a deep, shaggy pile is the problem. It is not, or at least not in the way people think. Pile traps air, but air is a poor conductor only when it is held still in dense material; the bigger determinant is the carpet’s backing and overall density. A heathered carpet with a hessian or woven back is comparatively breatheable and frequently sits comfortably within the limit, while a thin-looking carpet with a dense felt or foam backing can carry a surprisingly high tog.

Read the label rather than judging by hand. Carpet manufacturers publish tog ratings for a reason, and many now tag ranges as underfloor-heating compatible, which removes the guesswork entirely. Where a specific carpet lacks a published figure, the retailer or manufacturer can provide it, and the question is routine enough that no reputable supplier should be surprised. Natural fibres — wool and wool blends — are perfectly suitable, as are synthetics; the governing number is the tog, not the material, though the floor’s maximum temperature also has to respect the fibre manufacturer’s limit.

For rooms where the heart is set on a carpet that simply cannot meet the combined limit, there are two honest alternatives rather than forcing the issue. Use the carpet in a room with a different heat source and put a lighter covering over the heated floor, or reconsider the room layout so the dense carpet sits on an area rug over a hard, heated finish — the rug can be removed when the floor needs to heat the room quickly. Both are better than commissioning a system that cannot perform.

Close-up of a rug on the floor
Pile depth matters less than backing and density; the published tog is the number to use.

Temperature limits and the role of the floor probe

Tog is half the specification; the floor temperature cap is the other. Underfloor heating under carpet is not run at the same surface temperature as under tile, both to protect the fibre and to avoid the trapped-heat problem. A surface limit around 27 °C is the common guidance, and the carpet or fibre manufacturer may set a lower figure, which then governs. The system’s documentation should state the cap, and the control should be configured to hold it.

This is where the floor probe earns its place. A thermostat relying only on an air sensor can keep calling for heat while the covering traps it, driving the slab temperature upward underneath. A floor probe embedded in the build-up measures the actual floor temperature and caps it at the configured limit, protecting both the carpet and the element. Any smart thermostat used for a carpeted room should have a floor probe installed and the limit set during commissioning, not left at the factory default.

Expect heat-up to be slower than under tile. The covering adds a small thermal delay, and a carpeted floor typically takes longer to bring the room up to temperature than a hard finish. The practical response is scheduling rather than power: run the system a little earlier in the morning rather than specifying a higher wattage, which would only push more heat into a covered element. A correctly sized, correctly capped system is comfortable and efficient; an oversized one is neither.

The room-by-room checklist before you order

  • Get both tog numbers in writing: the carpet and the underlay, added together, at or below 2.5, or the heating manufacturer’s own ceiling if lower.
  • Specify a heating-rated low-tog underlay: around 0.75–1.0 tog, and do not substitute a dense felt or rubber product.
  • Check the backing: woven or hessian backs are usually safer; treat dense felt and foam backs as requiring a label check, not a guess.
  • Confirm the floor temperature cap: typically 27 °C or the fibre manufacturer’s limit, set on the control.
  • Make sure a floor probe is installed: the air sensor alone cannot protect a covered floor.
  • Allow for slower heat-up: schedule morning warm-up earlier instead of raising the wattage.
  • Keep the paperwork: the tog labels and the commissioning settings, in case the room ever needs a new covering.

Data and evidence

The guidance figures in this article — the 2.5 combined tog ceiling, low-tog underlays around 0.75–1.0, and the roughly 27 °C surface temperature cap — reflect established UK and Irish flooring and heating industry guidance, including the Carpet Foundation recommendations, and should be checked against the specific heating manufacturer’s instructions, which can vary slightly. The tog ranges quoted for carpets and underlays are typical industry bands rather than universal values; actual ratings come from the product labels and should be used in the calculation.

The product and factory details follow SunAura factory records: heating mats and controls manufactured in Qingdao, Huangdao District since 2008, ISO 9001, ISO 14001 and ISO 45001 management systems, CE and RoHS marked products, LVD and EMC tested, exported to more than 50 countries. Every heating element is continuity and insulation tested at the factory, and the floor-probe and temperature-cap settings are part of the commissioning guidance supplied with the system.

As always, certificate numbers are not printed in articles because audit cycles change the documents; the current Declaration of Conformity and test reports are provided on request and can be checked against the equipment actually delivered.

FAQ

Can you have carpet over underfloor heating at all? Yes, comfortably. The rule is the combined carpet and underlay rating: keep it at or below 2.5 tog, use a heating-rated low-tog underlay, and cap the floor temperature around 27 °C.

Is a thick pile carpet a problem? Pile depth itself is less decisive than the backing and overall density. A woven-backed heathered carpet can be fine while a dense felt-backed carpet carries too much resistance. Always use the published tog rather than judging by appearance.

Do I need a special thermostat? You need a control with a floor probe so the slab temperature is measured and capped, rather than one relying only on the air sensor. Most modern smart thermostats support a probe; the limit has to be configured during commissioning.

Why does the room heat more slowly than my tiled bathroom? The carpet adds thermal resistance and a small delay. The remedy is scheduling the warm-up earlier, not increasing the wattage, which would trap heat under the covering.

What if my chosen carpet exceeds the limit? Either choose a lighter covering for the heated room, use the dense carpet elsewhere, or put it on an area rug over a hard heated finish. Forcing an over-tog combination guarantees disappointing performance.

Next step

Bring us the room dimensions, the carpet and underlay tog labels, and the floor build-up. We will confirm the combination works, size the element and circuits, specify the probe and temperature cap, and quote the complete system, usually within one working day. The whole question comes down to one twenty-minute calculation before you buy — and it is far cheaper to do it in the showroom than under a finished floor.

Daniel Foster, Buying Adviser, SunAura Thermal