Roof & Snow Melting
One method for six winter surfaces: heat density per square metre, control strategy and drainage — settled before the concrete is poured.
- 300–500 W/m²
- 110–240 V
- 1–12 m²
- CE · RoHS
Snow melting mats are pre-made, weatherproof electric panels that lie flat on roofs, driveways, ramps and gutters and melt falling snow on contact. Instead of shoveling, salting or waiting for a contractor, a snow and ice melting mat keeps the surface dry and trafficable the moment it is powered — a silent, set-and-forget alternative to manual winter maintenance.
This category collects the full SunAura range of deicing mat products: modular 0.5 m-wide sections from 1 m² to 24 m², PVC or rubber jackets, FEP-insulated roof variants, and wide-voltage builds from 12 V to 380 V. Every mat is manufactured in our Qingdao factory and batch-tested before export.
Where snow melting mats are used

Roof edge and valleys
A roof snow melting mat keeps the roof edge at melt-through temperature so meltwater drains instead of refreezing — the core of ice dam prevention mat systems. Our FEP insulated roof snow melting mat and roof & gutter mat cover this application.
See the mat range →
Driveways and aprons
A driveway snow melting mat or heated driveway mat lays under pavers, asphalt or concrete. High-density 240 V at 500 W/m² (240 V, 500 W/m² mat) is built for steep slopes and heavy-snow regions; the road snow melting mat handles embedment in concrete or asphalt for access roads.
See the mat range →
Ramps and walkways
A ramp snow melting mat paired with a snow/ice sensor clears loading docks and wheelchair ramps automatically. Our non-slip walkway snow melting mat adds a textured grip surface for pedestrians.
See the mat range →
Walkways and entrances
The walkway de-icing mat, sidewalk mat and corridor mat range keeps public approaches slip-free all winter.
See the mat range →
Gutters, downspouts and valleys
Keep the eave and the drainage path above freezing so meltwater reaches the ground instead of refreezing at the gutter lip.
See the mat range →
Steps, stairs and access roads
Stair treads need their own sizing — a driveway mat cut to fit leaves cold edges. For roads and yards, a 500 W/m² build is embedded in concrete or asphalt.
See the mat range →Technical Specifications
| Parameter | Specification |
|---|---|
| Modular size | 0.5 m wide × 2–24 m long (1–12 m² per section); custom sizes on ODM |
| Voltage | 110 V / 220 V / 240 V standard; 12–380 V wide-range version available |
| Power density | 300 W/m² (110 V / 220 V) to 500 W/m² (240 V high-density) |
| Jacket options | PVC, rubber or FEP-insulated weatherproof construction |
| Controls | Snow/ice sensor ready; pair with a smart thermostat for automatic, energy-saving activation |
| Certification | CE & RoHS; 100% batch-tested in our Qingdao factory |
Choosing the Right Deicing Mat
Roofs and gutters. Choose an FEP insulated deicing mat rated for light panel loads — never drive on it. Aim for full roof-edge coverage from gutter up to the heated interior ceiling line to break the dam cycle.
Driveways and roads. Choose 300 W/m² for moderate climates, 500 W/m² for slopes and heavy snow. An anti-icing heating mat strategy (keep the surface just below freezing to freeze) uses far less energy than de-icing after storms — that is why a sensor is worth its cost.
Walkways. Prioritise a walkway heated mat with a textured non-slip surface, especially at retail, hospitality and public entrances.
Stairs and steps. Standard mats fit poorly on individual treads — use our dedicated step snow melting mats (stair-specific sizing) instead of cutting a driveway mat.
Prefer cable over mat? For irregular shapes, pipes or long valleys, a self-regulating heating cable (or our double-conductor heating cable) traces the route instead of covering it. Mats win on ease, cable wins on coverage flexibility.
FAQ
How many snow melting mats do I need for a driveway?
110V vs 230V snow melting mat — which should I choose?
Do snow melting mats need a snow sensor?
How long does a roof deicing mat last?
Can mats be left on in spring?
Next step
Send your roof plan, driveway dimensions and delivery country — our export team replies within 24 hours with a layout drawing and a quotation.
