Get a Quote

Drum & Industrial Heating Blanket Applications

Flexible electric blankets for drums, IBCs, wine barrels and equipment: viscosity control, frost protection and even process heating, sized from the container not the room.

  • 500–5,000 W
  • 0–145 °F
  • IP44
  • CE · RoHS
Silver full-wrap drum heating jacket with a digital controller
SunAura | Qingdao

Drum and industrial heating blankets wrap a flexible, insulated electric element around a container or piece of equipment instead of heating the whole room around it. A 1,300–3,000 W jacket on a 200 L (55 gal) drum holds viscous oil, grease, resin or syrup at a set temperature, so the contents pump or pour on a cold morning instead of staying solid at the bottom.

This page collects the SunAura industrial blanket programme: full- and half-wrap drum jackets, flat industrial blankets for equipment and pipes, and the less obvious jobs buyers rarely think of — wine and beer fermentation temperature control, IBC frost protection, gas-cylinder warming and on-site winter maintenance. Sizing always starts from the medium and the container, not from a wattage guess.

01

Where industrial heating blankets are used

02

Technical specifications

ParameterSpecification
Container fit200 L/55 gal full-wrap ~1,900×880 mm; half-wrap ~1,900×500 mm; IBC ~4,400×1,100 mm; custom sizes on ODM
Power range500–5,000 W; 1,300 W (120 V), 2,000 W (220 V) and 3,000 W common for 200 L drums
Voltage110/120/220/230/240/380 V built to the destination market; 120 V US and 230 V EU export versions
TemperatureStandard 0–145 °F (−18 to 63 °C); high-temperature versions hold up to 120 °C, 180 °C maximum exposure
ProtectionIP44 splash-proof, insulation resistance ≥500 kΩ, current typically ≤16 A, overheat protection and earthing
ConstructionSilicone-coated fibreglass or waterproof Oxford cloth, Ni-Cr element, aluminium reflective layer, ~15 mm insulation, quick straps
CertificationCE & RoHS, with FCC/ETL on selected models for the export market; one-year warranty
03

Choosing a heating blanket layout

01

Start from the medium. The temperature the fluid must hold, the coldest ambient and the container surface area decide the wattage. A glucose IBC at −10 °C and a 25 mm valve need completely different blankets.

02

Full-wrap or half-wrap. Full-wrap heats the whole wall and recovers fastest after a cold night; a half-wrap saves cost where the drum is partly insulated or only the lower layer thickens.

03

Specify food-grade early. Wine, beer, juice and edible products need the food-grade jacket and a calibrated controller; retrofitting that certification after production is not possible.

04

FAQ

Will a heating blanket work on a plastic as well as a metal drum?

Yes, when used within the controller range. The blanket heats the wall evenly rather than concentrating on one point, so both steel and HDPE drums are suitable; follow the temperature limit for the plastic.

Can the blanket be left on outdoors in rain and snow?

The IP44 jacket is splash-proof and built for outdoor and damp sites with the controller connected through an RCD. It is not submersible — keep the controller and plug above standing water and snow line.

How even is the heat on a wine or beer fermentation barrel?

The Ni-Cr element is laid in a uniform pattern with an aluminium reflective layer, so the wall temperature stays within a narrow band rather than forming a hot strip. The wall-mounted thermostat cycles against the barrel surface instead of the air.
05

Related scenarios

06

Deeper read

The drum jacket is only one member of a wider industrial heating family. The product detail page carries the full dimension table, the reference price guide with sources, the controller settings and the installation sequence, plus an embedded video of the blanket being fitted and switched on. Read it before you settle a container size.

Open the drum heating blanket product page →

Next step

Send the container type and dimensions, the medium, the lowest winter temperature and your supply voltage. Our engineers return a blanket size, wattage and controller recommendation within one working day, with the certification your market needs.

Last reviewed November 2026. Values follow the current cross-checked datasheet; custom dimensions and certification are confirmed per order.